Table des Matières
Publicité
Step 23
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOORS may need some adjustments. Follow the text below
å
to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), loosen the
å
mounting screw several turns, then turn the adjusting screw in or
out. Tighten the mounting screw after making adjustments.
To adjust the DOORS up and down (vertical), loosen both vertical
å
adjustment screws. Move the DOOR up or down to the desired
location. Tighten the screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting screw
å
one turn and move the DOOR in or out, as needed. Tighten the
mounting screw after making adjustments.
Page 28
Mounting screw (depth)
(vertical adjustment)
Mounting screw
(depth)
(vertical adjustment)
413092
Adjusting screw
(horizontal)
RR
Adjusting screw
(horizontal)
QQ
www.sauder.com/services
Publicité
Table des Matières
