Presets - Wellsystem Relax Instructions De Service

PRESETS

The setting mode enables you to call up operating states and make
alterations to current settings.
– Insert service card.
– The code for the last function setting, e.g.
screen.
– Press button to display the current setting for this function, e.g.
.
– Press the + or – buttons to modify the setting.
– Confirm by pressing .
– By pressing the + button you scroll up to the next function.
– By pressing the – button you scroll down to the next function.
32
Example: Setting the water temperature
– Insert service card.
– Press + or – button until function
– Press button
35 (°C) or 100 (°F).
– Press the + button to set the temperature to 38 (°C) or 102 (°F).
– Confirm by pressing
– Remove service card.
30292 / 0
, is shown on the
is displayed.
to display the current setting for this function, e.g.
.
is shown on the screen.