Sauder Credenza 415373 Mode D'emploi page 27

Step 21
1
D24
Groove
Insert the SMALL DRAWER SIDES (D24 and D25)
å
at an angle into the slot at each end of the RIGHT
DRAWER FRONT (R).
3
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Fasten the SMALL DRAWER BACK (D154) to the SMALL DRAWER SIDES (D24 and D25). Use four BLACK 1-9/16" FLAT
å
HEAD SCREWS (30S).
NOTE: Be sure the SMALL DRAWER BOTTOM (D960) inserts into the groove of the SMALL DRAWER BACK (D154).
å
Repeat this step for the other small drawer using the LEFT DRAWER FRONT (S).
å
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D25
R
D154
D24
D960
VIEW THE T-LOCK BOX VIDEO
2
D960
U n
fi n
s u
r f a
D24
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D960) into the grooves in
å
the SMALL DRAWER SIDES (D24 and D25) and RIGHT
DRAWER FRONT (R).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D25
415373
With the palm of your
hand, tap the DRAWER
BOTTOM down into
the groove.
i s h
e d
c e
D25
R
30S
(8 used in this step)
Page 27