Fusion MS-RA210 Manuel De Demarrage Rapide page 4

2
If necessary, press the dial to switch between zones.
TIP: You can press and hold the dial to adjust the subwoofer level of a zone.
Selecting a Source
1
Select .
2
Turn the dial to highlight a source.
3
Press the dial to select the source.
Adjusting the Backlight Brightness
NOTE: If you connected the dim wire on the wiring harness to the boat's
illumination wire, the backlight dims automatically when the boat lights are on.
This may affect how you adjust the brightness setting.
1
Select > BRIGHTNESS.
2
Adjust the brightness level.
Media Player Connection
Always disconnect your media player from the stereo when not in use and do not
leave it in your vessel. This helps reduce the risk of theft and damage from
extreme temperatures.
Do not remove the media player or use your stereo in a distracting manner while
operating the vessel. Check and obey all marine laws in association with use.
The stereo accepts a variety of media players, including smartphones and other
mobile devices. You can connect a compatible media player using a Bluetooth
wireless connection or a USB connection to the USB port.
USB Device Compatibility
You can use a USB flash drive or the USB cable included with your media player
to connect a media player or mobile device to the USB port.
The stereo is compatible with iAP2 Apple
iPhone Xs, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus,
4
CAUTION
® devices such as the iPhone ® Xs Max,
iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6,
iPhone 5s, and iPod touch (6th generation).
®
The stereo is compatible with Android ™
The stereo is compatible with media players and other USB mass storage
devices, including USB flash drives. Music on USB drives must meet these
conditions:
• The music files must be formatted as MP3, AAC (.m4a), or FLAC, files.
• If you connect a portable hard drive, you must connect it to an external power
source. The USB port on this stereo cannot provide power for a portable hard
drive.
• The USB mass storage device must be formatted using one of the following
systems:
1
◦ Microsoft ® : NTFS, VFAT, FAT , MSDOS
◦ Apple: HFS, HFSPLUS
◦ Linux: EXT2, EXT3, EX4
Connecting a USB Device
You can connect a USB device to the USB port on the stereo.
1
Locate the USB port on the back of the stereo.
2
Connect the USB device to the USB port.
3
Select the USB source.
Connecting a Compatible Bluetooth Device
You can play media from a compatible Bluetooth device using the Bluetooth
wireless connection.
You can control the music playback with the media app on a Bluetooth device or
using the Fusion-Link remote control app (page 6).
™
1
Select the BT source.
2
Select > BT > CONNECTIONS > DISCOVERABLE to make the stereo
visible to your compatible Bluetooth device.
1
FAT includes most types of FAT file systems except exFAT.
devices that support MTP mode.
Quick Start Manual