HOW TO USE YOUR SPA
6.
= Wi-Fi icon just indicates that the Wi-Fi link is connected. It does not indicate signal
strength. Note: Not all systems that support Wi-Fi display this icon.
7. Lock Icon: When displayed, indicates the panel is in a locked mode. To unlock or lock a setting
or panel lock, first press the corresponding icon on the Lock Screen then press the word "Lock"
for 5+ seconds until the text and icon change to the opposite state.
There are 2 lock icons that can be shown on the title bar of most screens.
A tall skinny one
affected by the settings lock.
And the standard lock icon
panel are locked, only the panel lock will show since the settings lock doesn't do much in that
situation. When the panel is locked, the Settings Screen will only show items not affected by that
lock (System Info and Lock Screens).
8.
= Invert (or flip) Screen.
9.
= Light is turned ON.
10.
= Music is Active.
11. Message Waiting Indicator:
The Message Waiting Indicator will show one of the following icons:
= Fatal error (Spa can't function until it's fixed)
= Normal Error or Warning
= Reminder Message
= Information Message.
Some messages will include the "Call for Service" text as it requires a service technician to fix the
problem. If the panel is locked and a message alert appears, you will be taken to the UNLOCK
screen before you can clear the message. Touching the Error/Warning/Reminder/Info Icon on
the Message Screen will take you to the System Information Screen to allow for troubleshooting
over the phone or for a field service tech to better understand what is going on. Exiting the System
information Screen will take you back to the Message Screen in that situation.
12. Adjust set temperature higher.
13.
= Spa Equipment Control Icon. Brings up a screen where the spa jets, blower or other
equipment can be controlled.
14. Indicates if the temperature is in
26
Compact Kit for private use - Operating Instructions
representing a settings lock is applied. It is shown on screens that are
which represents the Panel being locked. If both settings and
= Light is Inactive.
= Music is Inactive.
= Jet is Inactive. Indicates if a pump is running or not.
= Fahrenheit or
= Light is Disabled.
= Music is Disabled.
= Celsius.