Aa Straight Hinge; Black 7/8" Machine Screw - Sauder HomePlus 411309 Mode D'emploi

10 10
Slide the mounting screw
part way out of the slot
and retighten before
attaching it to the door.
STRAIGHT HINGE
Adjusting
screw
Slide the mounting screw
part way out of the slot
and retighten before
attaching it to the door.
CURVED HINGE
Adjusting
screw
Carefully stand your unit upright.
NOTE: You may need to loosen the adjusting screw and mounting screw to slide the HINGE part way out of the slot. Retighten the
screw before you mount the HINGE to the END and BOTTOM.
Fasten the LARGE DOOR (G) to either the RIGHT END (A) or the LEFT END (B). Use the screws in the HINGES.
Fasten the SMALL DOOR (H) to the BOTTOM (D). Use the screws in the HINGES.
Fasten the PULLS (Y) to the DOORS (G and H). Use four BLACK 7/8" MACHINE SCREWS (FF).
Peel a BUMPER from the BUMPER CARD (Z) and stick it on the DOORS (G and H) where it comes in contact with the ENDS (A
and B).
Page 14
Z
Y G
Z
Z
Y
www.sauder.com/services
B
E
H

BLACK 7/8" MACHINE SCREW

A
D
FF
(4 used for the PULLS)
411309