Sauder HomePlus 411309 Mode D'emploi page 15

11 11
Adjusting screw
(horizontal)
(vertical adjustment)
STRAIGHT HINGE
Refer to the enlarged diagram to identify the parts on the HINGES.
The LARGE DOOR may need some adjustments. Follow the text below to make needed adjustments.
DOOR ADJUSTMENTS:
To adjust the LARGE DOOR from side to side (horizontal), loosen the mounting screw several turns, then turn the adjusting screw in
or out. Tighten the mounting screw after making adjustments.
To adjust the LARGE DOOR up and down (vertical), loosen both vertical adjustment screws. Move the DOOR up or down to the
desired location. Tighten the screws after making adjustments.
To adjust the DOOR in or out (depth), loosen the mounting screw one turn and move the DOOR in or out, as needed. Tighten the
mounting screw after making adjustments.
411309
Mounting screw
(depth)
www.sauder.com/services
Page 15