Sauder HomePlus 411309 Mode D'emploi page 16

12 12
Refer to the enlarged diagram to identify the parts on the HINGES.
The SMALL DOOR may need some adjustments. Follow the text below to make needed adjustments.
DOOR ADJUSTMENTS:
To adjust the SMALL DOOR up or down (vertical), loosen the mounting screw several turns, then turn the adjusting screw in or out.
Tighten the mounting screw after making adjustments.
To adjust the DOOR from side to side (horizontal), loosen both horizontal adjustment screws. Move the DOOR left or right to the
desired location. Tighten the screws after making adjustments.
To adjust the DOOR in or out (depth), loosen the mounting screw one turn and move the DOOR in or out, as needed. Tighten the
mounting screw after making adjustments.
Page 16
(vertical adjustment)
www.sauder.com/services
Mounting screw (depth)
CURVED
(horizontal adjustment)
HINGE
411309