Sauder HomePlus 411309 Mode D'emploi page 17

13 13
 Place your unit into its final position against a wall. If necessary, turn the ADJUSTABLE GLIDES out to level the unit.
 Fasten the SAFETY BRACKET (X) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (GG) into the top of the
unit and a BLACK 1-7/8" FLAT HEAD SCREW (EE) into a stud in your wall.
Push the RUBBER SLEEVES (U) over the METAL PINS (T). Insert the METAL PINS into the hole locations of your choice in the
ENDS (A and B). Set the ADJUSTABLE SHELVES (K) onto the METAL PINS.
While holding the SMALL DOOR up, push a METAL PIN (T) into each END (A and B) as shown. These are used for stops to keep the
SMALL DOOR from opening to the floor.
NOTE: Please read the back pages of the instruction booklet for important safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
411309
No load
K
25 lbs.
K
25 lbs.
30 lbs.
30 lbs.
www.sauder.com/services
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
X
BLACK 9/16" LARGE HEAD SCREW
(1 used for the SAFETY BRACKET)
T
U
(8 used)
T
(2 used)
EE
GG
Page 17