Publicité
Les langues disponibles
Les langues disponibles
REMOVE DOORS
IMPORTANT: Keep the refrigerator doors closed until you are ready to lift
them from the cabinet.
1.
Remove the Freezer bottom hinge cover screws and hinge cover.
Pull out the locking washer from the water pipe connector and the pull out
2.
the freezer door water pipe from quick connector.
Note: please be noted the fast connector can't be left at the end of
water pipe of door.
3.
Using a Phillips screwdriver, remove the four screws attaching the
hinge cover to the top of the cabinet.
4.
Slowly lift the hinge cover, keeping the wire harnesses attached.
5.
Disconnect the wiring harnesses by pressing the release catch
on each wire harness connector, and then pulling the ends apart (left-
hand door hinge only).
12
Hinge cover
Screws
Wiring harnesses
Publicité
