Important Safety Instructions - Makita ML187 Manuel D'instructions

ENGLISH (Original instructions)
1. Battery cartridge
2. Red indicator
SPECIFICATIONS
Model
LED
Operating time
Standard battery cartridges
Voltage
Dimensions (L x W x H) (with battery)
Net weight (with battery)
Symbols
................ Read instruction manual.
................. Indoor use only
................. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste Batteries
and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
3. Use a power source with the voltage specified on the
nameplate of the charger.
4. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
Explanation of general view
3. Button
4. Switch
BL1411G
14.4 V
313 mm X 84 mm X 101 mm
0.66 kg
5. Charge the battery cartridge with room temperature at
6. When battery pack is not in use, keep it away from
7. After charging or before attempting any maintenance
8. This battery holder part is not waterproof. Do not use it
9. Do not touch the inside of the flashlight head with
10. Under abusive conditions, liquid may be ejected from
11. Do not short the battery cartridge:
12. If electrolyte gets into your eyes, rinse them out with
13. Be careful not to drop or strike battery.
14. Do not incinerate the battery cartridge even if it is
1. When the tool is not in use, always switch off and
2. Do not store the tool and battery cartridge in locations
3. Do not give the tool a shock by dropping, striking, etc.
5. Shoulder strap
ML187
0.1 W x 9 pcs
Approx. 15 hours
313 mm X 84 mm X 118 mm
10°C - 40°C (50°F - 104°F).
Let a hot battery cartridge cool down before charging
it.
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may cause
sparks, burns, or a fire.
or cleaning, unplug the charger from the power
source.
in damp or wet locations. Do not expose it to rain or
snow. Do not wash it in water.
tweezers, metal tools, etc.
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
clear water and seek medical attention right away. It
may result in loss of your eyesight.
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
CAUTION:
remove the battery cartridge from the tool.
where the temperature may reach or exceed 50°C
(122°F).
BL1811G
18 V
0.72 kg
3