Electrical Connection - Thermador Masterpiece HDDB30WS Instructions D'installation

7. Install the two cable holders into the blower housing.
8. Pass the cable connector under the holders and secure
them.
A
A
A. Hood drawer installation screws
B. Plastic cable holder
9. Plug the wire connector assembly supplied with the
blower housing to the mating cable connector from the
range hood.
Installation Instructions
All manuals and user guides at all-guides.com
D
B
C
A
C. Cable holder screws
D. Drawer connector
Connect Vent System
1. Fit vent system over the exhaust outlet.
2. Measure from the bottom of the air delector to the
Wall
outlet
3. Seal connection with clamps.

Electrical Connection

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
•
•
•
Roof
outlet
Dimension
to measure
English | 15 |