Thermador Masterpiece HDDB30WS Instructions D'installation page 14

Vent cover bracket installation
1. Assemble the 3 pieces of the vent cover bracket using
4 - 4.2 x 8 mm screws provided. The assembled bracket
should be sized to it inside the upper vent cover.
D
C
A. Vent cover bracket assembly
B. Upper vent cover
2. Position vent cover bracket on wall about
C
D
A. 8 x 40 mm drywall anchors
B. Centerline on wall
C. Vent cover support bracket
4. Drill 3/8" (9.5 mm) holes for wall anchors and insert
anchors lush with the wall.
English | 14 |
All manuals and user guides at all-guides.com
A
B
C. 4.2 x 8 mm screws
D. Centerline
1 ⁄
A
B
E
D. 5 x 45 mm screws
E. Centerline of bracket
⁄
⁄
Install 2 - 5 x 45 mm lower mounting screws with lat
A Upper mounting screws
B Security screws
B
3. Tighten the upper installation screws.
4. Using 2 or more people, lift the hood drawer beneath
the motor housing. Insert the hood drawer pins
into the housing lower slots. Once the four pins are
already inserted, the hood drawer stands hanging.
5. Secure the drawer with seven screws.
6. Untie the drawer connector and extend it to the upper
side of the blower housing.
A
Installation Instructions