Publicité
Les langues disponibles
Les langues disponibles
6 Permanent settings in programming mode
Automatic switch-off
In programming mode you can set the switch-off time and water
hardness. Press the f button to enter programming mode. Press
the f button again to exit this mode.
By instructing your ENA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your ENA switches off automatically after the preset time following
the last action on the machine.
The number of symbols that are brightly lit up indicates the
activated switch-off time:
Switch-off time
30 minutes
1 hour
2 hours
4 hours
Example: Proceed as follows to change the switch-off time from
30 minutes to 1 hour.
Press the f button.
T
The
&
symbol lights up brightly.
Press the ] button several times until the
T
brightly.
Press the s button to enter the program item.
T
Press the [ / ] button to change the setting for the switch-off
T
time.
Press the s button to confirm the setting.
E The setting must be confirmed within 20 seconds.
The
sss£
symbols flash 3 times in quick succession.
E The automatic switch-off can also be set using the JURA app
(J.O.E.
).
®
6 Permanent settings in programming mode
Symbol(s) shown in display
s
s s
s s s
s s s £
ü
symbol lights up
en
fr
es
pt
17
Publicité
