Maintenance; Troubleshooting - Fanimation ROTATION FP8018 Serie Mode D'emploi

Periodic cleaning of your new ceiling fan is the only
maintenance necessary.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
For your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan.
Trouble
1. FAN WILL NOT START
2. FAN SOUNDS NOISY
3. FAN WOBBLES
EXCESSIVELY

Maintenance

Troubleshooting

Probable Cause
1. Fuse or circuit breaker blown.
2. Loose power line connections to the fan, or loose
switch wire connections in the switch housing.
1. Motor noise caused by solid state variable speed
control.
1. Clevis nut in hanger bracket/downrod is loose.
Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
WARNING
1. Check main and branch circuit fuses or circuit
2. Check line wire connections to fan and switch wire
CAUTION: Make sure main power is turned off !
1. Some fan motors are sensitive to signals from
1. Tighten clevis nut securely in hanger bracket/
12
CAUTION
Suggested Remedy
breakers.
connections in the switch housings.
solid-state variable speed controls. Solid-state
controls are not recommended, choose an alternative
control method.
downrod support.