Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How to Assemble Your Ceiling Fan (Continued)
5. Cut off excess lead wire approximately 6 to 9 inches
above top of the downrod. Strip insulation off 1/2 inch
from the end of each lead wire. (Figure 6)
CAUTION
All set screws must be checked, and retightened where
necessary before installation.
WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before hanging.
(Figure 1)
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advise, as it must be
grounded for safe operation.
1.
Remove the two screws from the canopy and retain
the screws for " How to Install Your Canopy Housing "
Step 1. (Figure 2)
WARNING
The fan must be hung with at least 10´ of clearance
from floor to blade and MUST ONLY be hung in a
vertical downward position from ceiling. (Figure 3)
CAUTION
To Reduce the Risk of Personal Injury, this Product
Must be Secured as Described in the Manual.
How to Hang Your Ceiling Fan
Ceiling
WARNING:
Do NOT Mount Fan
On Wall Or Floor
8
Figure 6
Main Fuse Box
Figure 1
Ceiling Canopy
Figure 2
2.5 ft min.
from
staircase
or wall
No
less than
10 ft
Floor
Figure 3
Publicité
Table des Matières
