MAAX Olio 107140 Guide D'installation page 7

Installation steps
6030 WALL SET
23 25
24
Pre-drill the vertical and horizontal anges in front of the studs
Check for level. Shim if necessary.
and secure them with screws.
26
27
Apply silicone along the inside edge horizontally and vertically. Lay the side wall in position.
Pre-drill the vertical and horizontal anges in front of the
studs and secure them with screws.
28
Clean unit. Apply a strip of painter's masking tape along the inside edge of each side of the seam
where silicone sealant will be applied. Apply silicone to the joints/seams and smooth over with
nger or caulking tool. While the silicone is still wet, remove tape strips along joint edges.
NOTE: Allow silicone to cure for 24 hours (normal cure time) before using bath or shower.
Customer Service: 1-877-GET-MAAX (1-877-438-6229).
— 7 —