MAAX Olio 107140 Guide D'installation page 6

18 18
Apply silicone at the back horizontal edge and continue for a length of 8" on each side.
20 20
Level back wall vertically & horizontally. Shim if necessary.
22 22 22
8 3/4"
Fix a 2" x 3"x 3 1/2" wood block approximatively at 46" from the oor, protuding 1 1/4"
to the inside of the shower alcove. The stud supporting the block has to be placed 8 3/4" from
the back wall studs.
1 1/4"
46" from oor
Customer Service: 1-877-GET-MAAX (1-877-438-6229).
— 6 —
Installation steps
19 19
Lift and place back wall.
21 21
Fasten anges along top of back wall with fasteners into each corresponding stud. Pre-drill
vertical and horizontal anges in front of studs and fasten with screws.
23
23
Apply silicone along the inside edge horizontally and vertically. Lay the side wall in position.
6030 WALL SET