Dreame VTE1-GR3 Mode D'emploi page 19

Care & Maintenance
EN
3. Remove the pre-filter first, then lift the handle of the cyclone assembly and turn it
counterclockwise until it stops, then pull to lift out the cyclone assembly.
4. Rinse the cyclone assembly, pre-filter, and dust cup until they are clean. After washing,
air dry for at least 24 hours .
Note:
• It is recommended to clean the dust cup once every month.
• It is recommended to clean the pre-filter at least once every 3 months and the cyclone
system at least once every 6 months.
18
1
Dust Cup Cyclone Assembly
2
3
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
Pre-Filter