Automatic Restart - Royal Sovereign ARP-9009TL Manuel Du Propriétaire

tiMer
There∙are∙2∙different∙timer∙programs.∙You∙can∙set∙the∙number∙of∙hours∙before∙the∙air∙conditioner∙automatically∙turns∙OFF∙so∙that∙you∙can∙set∙the∙number∙of∙hours∙that∙will∙elapse∙
before the unit turns ON.
When the air conditioner is turned off, you can choose to turn it on in one hour intervals.
1.∙Press∙the∙Timer∙button∙on∙the∙Control∙Panel∙(the∙timer∙indicator∙light∙will∙be∙lit).
2.∙∙ C ontinue∙to∙press∙the∙Timer∙button∙until∙you∙reach∙the∙number∙of∙hours∙you∙want∙to∙elapse∙before∙the∙unit∙turns∙on.∙∙Example:∙lf∙you∙want∙the∙air∙conditioner∙to∙turn∙on∙in∙eight∙
hours, press the button until you see 8 on the display.
3. The unit will turn on when the set time elapses.
When the air conditioner is turned on, you can choose to turn it off in one hour intervals.
1.∙Press∙the∙Timer∙button∙on∙the∙Control∙Panel∙(the∙timer∙indicator∙light∙will∙be∙lit).
2.∙∙ C ontinue∙to∙press∙the∙Timer∙button∙until∙you∙reach∙the∙number∙of∙hours∙you∙want∙to∙elapse∙before∙the∙unit∙turns∙off.∙Example:∙lf∙you∙want∙the∙air∙conditioner∙to∙turn∙off∙in∙eight∙
hours, press the button until you see 8 on the display.
3. The unit will turn off when the set time elapses.
Sleep
Sleep Mode is used to keep the room comfortable while saving energy. When the Sleep Mode button is pressed, the set temperature will increase by 2 °F in the first hour and
increase another 2° the second hour. It will then remain at that temperature for the remainder of the night.
tanK FUll
The∙appliance∙has∙built-in∙evaporating∙system.∙∙The∙water∙is∙turned∙into∙humid∙air∙and∙evaporated∙through∙the∙exhaust∙hose.∙If∙the∙humidity∙level∙is∙high,∙it∙is∙possible∙to∙have∙to∙
empty the internal water tank manually. If this happens, an alarm will beep for 15 times and the unit will stop running. The appliance can be restarted after draining the
condensate water through drain port located at the bottom of the back of the PAC.

aUtoMatic reStart

In the event of a power failure: The settings will return to the previously set operating modes once the power is restored.
10