hestan KWC Serie Mode D'emploi page 15

CONTROLS AND OPERATION
(CONT.)
DISPLAY INFORMATION AND MALFUNCTION MESSAGES
An integrated control system provides information through light signals or text messages
EN
shown on the display.
The information signal is always shown with a steady text message, while a malfunction signal
is shown with blinking text. The sound signal that accompanies some malfunction signals can
be silenced by pressing the Alarm button on the main control panel.
The list of malfunction signals is located at the back of this manual.
SPECIAL SETTINGS AND FUNCTIONS
The appliance can be configured to suit various needs through its settings, such as its operating
modes, display language, and information display. Special functions are provided to meet
various short term needs, such as parties or vacations.
The Settings and Functions are accessed on the main display by pressing the button.
The Up/Down buttons show the available functions, which can be selected by pressing the
button. The display shows the current function status.
Using the Up/Down buttons , it is also possible to scroll through the selected function's sub-
menu if applicable, activating or deactivating by pressing the button.
Once the function is confirmed, the display will automatically step back to the main menu to
allow selection of other functions. At any time it is possible to return to the previous selection
through the button.
The language of the messages appearing on the display can be changed by operating as follows:
Enter the Menu by pressing the button, select Settings via the Up/Down buttons and
confirm via . Then select the Language function and the desired language.
See also: "USING THE CONTROL MENUS" on page 10.
UNLOCKING THE KEYPAD
The keypad automatically locks after a while if not being used. When it is locked, any touch of
the keypad will display "KEYPAD LOCKED'.
To unlock, touch the button for several seconds, until the message "KEYPAD
UNLOCKED" shows on the display.
13
©2019 Hestan Commercial Corporation