Sony HST-471 Mode D'emploi page 30

Specifications (continued)
Inputs
PHONO (phono jacks):
CD (phono jacks):
VIDEO1, 2 (phono jacks):
Outputs
VIDEO1 (phono jacks):
PHONES (stereo phone jack):
Tape deck section
Track method
Wow & flutter
Frequency response
With DOLBY NR set to OFF
TYPE-I tape:
TYPE-II tape:
Speaker
For the speaker system, refer to the speaker's
manual.
30
EN
sensitivity 2.5 mV,
impedance 50 kilohms
sensitivity 400 mV,
impedance 50 kilohms
sensitivity 250 mV,
impedance 50 kilohms
voltage 250 mV,
impedance 1 kilohm
accepts low and high
impedance headphones
4-track, 2-channel stereo
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
60 – 13,000 Hz, ±3 dB
60 – 14,000 Hz, ±3 dB
General
Power requirements
European model:
Australian model:
Other models:
Power consumption
Dimensions (w/h/d)
Mass
Supplied accessories:
Design and specifications are subject to change
without notice.
220 – 230 V AC,
50/60 Hz
240 V AC,
50/60 Hz
110 – 120 V AC or
220 – 240 V AC,
50/60 Hz
(adjustable with the
voltage selector)
240 watts
Approx.
430 × 330 × 355 mm
Approx. 10.5 kg
Remote RM-U575 (1)
Sony SUM-3 (NS)
batteries (2)
AM loop antenna (1)
FM lead antenna (1)