Oven Extendable Rack - Fulgor Milano F1SP24 1 Série Manuel D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour F1SP24 1 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To remove Oven Rack from the oven:
1. Pull rack forward
Front
2. Lift rack up at front and then remove it
Front

Oven Extendable Rack

The Extendable Rack allows for easier access to
rack bringing the food closer to the user.
When the rack is outside of the oven, slide arms
do not lock. They could unexpectedly extend if the
rack is carried incorrectly. Extending slide arms
or carried by grasping the sides.
To remove Extendable Rack from the oven:
1. Lift of rack slightly and push it until the stop
release
Front
2. Raise back of rack until frame and stop clear
rack guide
Front
3. Pull rack down and out
Front
CAUTION
To replace an Oven Rack:
1. Place rear of rack between rack level guides
Back
Front
2. While lifting front of rack, slide rack in all the
way while lowering the front
Back
Front
NOTE: Always remove the Extendable Rack before
Self-Cleaning the oven.
CAUTION! To avoid burns, pull rack all the way out
and lift pan above handle when transferring food to
and from oven.
Please refer to illustration on Page 6 if there is any
question as to which side is the front of the rack.
To replace an Extendable Rack:
1.
(including frame) above desired rack guide
Front
Back
2. Push all the way in until the back of the rack
drops into place
Front
Back
3. Pull both sections forward until stops activate.
Back
Front
Use & Care Manual
ENGLISH
Back
Back
Back
Back
Back
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

F1sp30 1 série

Table des Matières