General Oven Information; Before Using Your Oven - Fulgor Milano F1SP24 1 Série Manuel D'utilisation Et D'entretien

Before using your oven

•
Remove all packing and foreign materials
from the oven. Any material of this sort left
inside may melt or burn when the appliance
is used.
•
Heat the empty appliance to the maximum
temperature in order to remove any
manufacturing residues which could affect
the food with unpleasant odours.
120 V / 240 V vs. 120 V / 208 V Connection
High Altitude Baking
When cooking at high altitude, recipes and cooking
time will vary from the standard.
Power Failure
After the power returns to the oven, the clock
displays the time 12.00.
E Error Number Codes
If E codes are displayed when the electronic control
detects a problem in the oven or in the electronics.
Squeak Noise
the oven due to heat warping, but this is not a
malfunction.
Flashing Symbols or Numbers
Signal an incomplete action that is in progress
(locking the door, preheat, etc.).
Beeps
Signal that the set temperature has been reached.
Beeps also signal the end of a function or an oven
fault.
Convection Fan
The convection fan operates during any Convection

General Oven Information

CAUTION
Component Cooling Fan
Activates during any cooking or Self-Cleaning mode
to cool inner components and outer door surfaces.
This air is exhausted through the vent located above
the oven door. It continues to run until components
whenever the internal components temperature
becomes high.
Using Oven Lights
•
When the oven is in use, oven lights turn on
automatically when a mode is started. Oven lights
oven mode is cancelled.
•
The lights do not operate in the Self-Cleaning
•
Fahrenheit and Celsius
The temperature is preset in Fahrenheit, however it
can be changed to Celsius. (see page 10)
Use & Care Manual
ENGLISH
7