Intellinet Network Solutions IPII-84G Instructions page 2

Instructions
This guide presents the basic steps to set up and operate this device.
For specifications, visit intellinetnetwork.com. Register your product at
register.intellinet-network.com/r/508919 or scan the QR code on the cover.
Power
B/3
A — Grounding Terminal
Wire the grounding terminal to an earth grounding object
to protect equipment from external electrical surges.
B — Terminal Block Installation (DC input 45 - 56 V)
Note: Ensure all power is off/disconnected before beginning! The wire
gauge for the terminal block should be in the range between 12 – 24 AWG.
1 Loosen appropriate screws. Insert bare power-supply
wires into appropriate terminal slots (positive wire into
positive slot; negative wire into negative slot, etc.).
2 Tighten appropriate screws to secure wires.
3 Install block into the device.
Connections
2
English
A
2
1
1 A
2