Allen + Roth 1315VA-48-201 Instructions De Montage page 7

VANITY INSTALLATION INSTRUCTIONS
8. To reinstall drawers into vanity (A), fully extend
metal glide tracks. Gently lower and slide
drawer box into rear glide catch. Next lower
drawer box down to completely rest on
extended glides. Then, push plastic levers to
lock the drawer box in place.
Repeat for remaining drawer.
Note: To Adjust the drawer box height, Spin
the adjustment wheel to the left to raise the
drawer box or spin the adjustment wheel to
the right to lower the drawer box. You can
adjust the left and right side glide heights
independently in order to find the drawers best
alignment position.
CAUTION
DO NOT force drawer or damage to glide may
occur. If drawer does not slide in with ease,
remove and try again from the start.
9. From Front the assembly, insert shelf pins (BB) at
desired height, ensuring they are level. Place
shelf (G) on top of shelf pins (BB).
Hardware Used
Shelf Pin
BB
All manuals and user guides at all-guides.com
1167FMM-26
x 4
7
2026VA-36-200
8
B
A
1
9
A
2
3
1
BB
G