Allen + Roth 1315VA-48-201 Instructions De Montage page 6

VANITY INSTALLATION INSTRUCTIONS
6. Apply silicone adhesive to the top edge of the
wood cabinet. With the help of another adult,
gently lower the stone top with assembled sink
onto the cabinet. Make sure the stone top is flush
with the back side of the wood cabinet and the
stone overhang is equal on both sides over the
wood cabinet left and right side walls. Remove
any excess adhesive before allowing to dry.
Tip: it may be easier to install the faucet and/or
drain assembly (not included) before
securing the stone top to the wood cabinet.
7. Apply adhesive (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess adhesive before allowing
to dry.
All manuals and user guides at all-guides.com
1328VB-48-242
1328VB-48-242
6
6
B
2
A
7
C
B
A
1
2
1