LSL 140+KL22 Serie Instructions De Montage page 2

Fitting instruction clamps
Fits on LSL-top yoke for Triumph Thruxton (part-no.: 140T031)
Important: If you are not a trained motorcycle mechanic, stop now. Ask a motorcycle shop to do the
work for you.
The position of the handlebar will change by the offset. Please make sure, that all Bowden-cables
and lines offer free wheel and no tension.
1. Make sure, that the handlebar has got sufficient clearance to the fuel tank.
2. All lines/cables must have the necessary length.
3. Safe all lines/cables against bending, twisting or squashing.
4. The bending radius of hoses may not be below 40mm. Hoses may not twist when suspension is
working or fork is moved across the steering angle.
5. If necessary use longer/shorter brake- and clutch-lines, according to the FMVSS 106 standard.
After the fitment, please control all bolted connections!
140+KL22..
Rev. 00 10/07/2014