Bosch GST 14,4 V-L Professional Mode D'emploi page 15

OBJ_BUCH-1257-002.book Page 15 Friday, September 23, 2011 11:26 AM
14 Handle (insulated gripping surface)
15 Button for charge-control indicator*
16 Battery charge-control indicator*
17 Stroke rod
18 Vacuum connection*
19 Vacuum hose*
20 Splinter guard
21 Steel sliding shoe*
22 Screw
23 Scale for mitre angle
24 Locking screw for parallel guide*
25 Parallel guide with circle cutter*
26 Centring tip of the circle cutter*
*Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Cordless Jigsaw GST 14,4 V-LI
Professional
Article number 3 601 E8J 4.. 3 601 E8J 3..
Rated voltage V=
Stroke rate at no load
-1
n min
0
Stroke mm
Cutting capacity, max.
– in wood mm
– in aluminium mm
– in non-alloy steel mm
Bevel cuts
(left/right), max. °
Weight according to
EPTA-Procedure
01/2003 kg
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Please observe that when using "Compact" Bosch batteries with re-
duced capacity, the performance of your power tool is also reduced.
Noise/Vibration Information
Measured sound values determined
according to EN 60745.
Typically the A-weighted noise levels
of the product are
Sound pressure level
Sound power level
Uncertainty K=
Wear hearing protection!
Bosch Power Tools
Vibration total values a
sum) and uncertainty K determined
according to EN 60745:
Cutting board:
a
h
K
Cutting sheet metal:
a
h
K
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
GST 18 V-LI
applications, with different accessories or poorly maintained,
Professional
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
14.4 18
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
0–2500 0–2700
icantly reduce the exposure level over the total working period.
23 23
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
90 90
accessories, keep hands warm, organise work patterns.
20 20
8 8
Declaration of Conformity
We declare under our sole responsibility that the product de-
45 45
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2.3 2.4
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 19.09.2011
Assembly
Before any work on the machine itself (e.g. mainte-
dB(A) 80 81
nance, tool change, etc.) as well as during transport
dB(A) 91 92
and storage, remove the battery from the power tool.
dB 3 3
There is danger of injury when unintentionally actuating
the On/Off switch.
English | 15
(triax vector
h
2
m/s 5.5
2
m/s 1.5 1.5
2
m/s 6.5 8.5
2
m/s 1.5 1.5
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
1 619 929 J70 | (23.9.11)
6