Page 1
FP4A0118 Single Handle Pull-Down Kitchen Faucet Robinet de cusine à une manette avec douchette extensible Tools needed (not included): Outils requis (non incluse): Adjustable wrench Silicone sealant Clé à molette Enduit d’etancheite au silicone Safety goggles Lunettes protectrices Safety Tips •...
Page 2
Important Information • Prior to beginning installation, turn off the cold and hot water lines and turn on the old faucet to release built-up pressure. • When installing your new faucet, first hand-tighten connector nuts. Then use one wrench to hold the fitting and a second wrench to tighten the nut an additional 1/4 turn.
Page 3
Faucet Installation/Installation du robinet Without deck plate:/Sans la plaque : Min. Max. Min. Max. 0.1cm 3.8 cm 3.5 cm 3.8 cm 1/16 in 1-1/2 in 1-3/8 in 1-1/2 in With deck plate:/Avec la plaque de pont : With deck plate:/Avec la plaque de pont : Min.
Page 4
Faucet Installation/Installation du robinet Continued/Suite Small hole Petit trou The word “FR£NT” on the top mounting fixture (J) must face the front Remove and discard the blue cap from the lower end of spray of the sink. Turn the screws with the provided hex wrench (L) hose (F).
Page 5
Faucet Installation/Installation du robinet Continued/Suite Large hole Grand trou Remove and discard the orange cap from the lower end of Loosen the set screw at the bottom of the faucet body (B) with the mixing tube (C). Insert the mixing tube (C) through the large hole provided small hex wrench (K).
Page 6
Faucet Installation/Installation du robinet Continued/Suite Attach the quick connector (G) over the spray hose (F). Attach quick connector (G) to mixing tube (C). Pull down on quick connector (G) to ensure it is secure. Fixez le raccord rapide (G) au boyau de douchette (F). NOTE: For removal, see “Quick Connector Removal.”...
Page 7
Final Installation/Installation finale Turn on water supply. Remove spray head (A). Hold hose tightly to prevent from retracting. Ouvrez l’alimentation d’eau. Retirez la douchette (A). Tenez le tuyau fermement pour l’empêcher de se rétracter. Turn on water and allow water to run through the hose to flush Turn off faucet.
Page 8
Quick Connector Removal/Retrait du raccord rapide Push quick connector housing upward. Hold clip and housing together and pull downward. Poussez le boîtier du raccord rapide vers le haut. Tenez l’étrier et le boîtier ensemble et tirez vers le bas.
Page 9
Parts Diagram/Schéma des pièces Index Botton / Capuchon indicateur Metal Handle / Manette en métal Trim Ring / Garniture circulaire Locking Nut / Écrou de blocage Ceramic Disc Cartridge / Cartouche à disque en céramique Deck Plate Assembly / Assemblage d’plaque décorative Sink Hole Cover / Couvercle de trou d’évier Screw / Vis Pull-Down Spray Head / Douchette rétractable...
Maintenance/Entretien Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty. Votre nouveau robinet est conçu pour vous offrir des années de rendement sans problème.