Page 1
FP4AF279 Single Handle Pull-Down Kitchen Faucet Robinet de cusine à une manette avec douchette extensible Tools needed (not included): Outils requis (non incluse): Adjustable wrench Silicone sealant Clé à molette Enduit d’etancheite au silicone Safety goggles Lunettes protectrices Safety Tips •...
Page 2
Important Information • Prior to beginning installation, turn off the cold and hot water lines and turn on the old faucet to release built-up pressure. • When installing your new faucet, first hand-tighten connector nuts. Then use one wrench to hold the fitting and a second wrench to tighten the nut an additional 1/4 turn.
Page 3
Faucet Installation/Installation du robinet Without deck plate:/Sans la plaque : Min. Max. Min. Max. 0.1cm 3.8 cm 3.5 cm 3.8 cm 1/16 in 1-1/2 in 1-3/8 in 1-1/2 in With deck plate:/Avec la plaque de pont : With deck plate:/Avec la plaque de pont : Min.
Page 4
Faucet Installation/Installation du robinet Continued/Suite The word “FR£NT” on the base (L) must face the front of the sink. Remove base insert (K) from top mount Installation bracket (L). Turn the screws with the provided hex wrench (N) clockwise until Retirez l’insert de base (K) de la support d’installation de the locking nuts secure the base (L) in place.
Page 5
Faucet Installation/Installation du robinet Continued/Suite Large hole Grand trou Insert the tube (C) through the large hole of the base (L). Align arrow on faucet body (B) with arrow on base (L). Attach Note: Ensure water supply lines (D) and tube (C) are aligned in faucet body to base and turn counter-clockwise.
Page 6
Remove the weight sleeve from the Quick Weight (F). Slide the Attach the quick connector (H) over the spray hose (G). Quick Weight (F) onto the spray hose (G). Attach the weight Fixez le raccord rapide (H) au boyau de douchette (G). sleeve onto the spray hose (G), at the weight sticker, with £...
Page 7
Final Installation/Installation finale Turn on water supply. Remove spray head (A). Hold hose tightly to prevent from retracting. Ouvrez l’alimentation d’eau. Retirez la douchette (A). Tenez le tuyau fermement pour l’empêcher de se rétracter. Turn on water and allow water to run through the hose to flush Turn off faucet.
Page 8
Quick Connector Removal/Retrait du raccord rapide Push quick connector housing upward. Hold clip and housing together and pull downward. Poussez le boîtier du raccord rapide vers le haut. Tenez l’étrier et le boîtier ensemble et tirez vers le bas.
Page 9
Parts Diagram/Schéma des pièces Screw / Vis Metal Handle / Manette en métal Trim Ring / Garniture circulaire Adjusting Ring / Bague de réglage Ceramic Disc Cartridge / Cartouche à disque en céramique Deck Plate Assembly / Assemblage d’plaque décorative Shank Assembly / Assemblage de tige Pattern Clip / Assemblage de tige Handle Spray With Check Valve / Douchette à...
Maintenance/Entretien Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty. Votre nouveau robinet est conçu pour vous offrir des années de rendement sans problème.