Stahl 8150/1 Serie Mode D'emploi page 37

Technical Data
Cover lock
Wall thickness
Enclosure cover
Mounting plate
Protective conductor
connection
Rated cross section
Note
For further technical data, see r-stahl.com.
212727 / 815060300170
2021-02-25·IO00·III·en·02
- with captive M6 stainless steel combo head screws or
- with cover hinges/cam locks
Double-bit key no. 5 for cam locks included in delivery
(Tightening torque: 4.5 Nm / 39.828 lb/inches)
min. 2 mm / 0.08 inches
3 mm / 0.12 inches
M8 blind rivet nut (1x): On the outside of the enclosure
M5 threaded hole (1x): In the mounting plate
M6 bolt (1x): Additionally on enclosures with cover hinges
2
max. 300 mm / 600 MCM AWG
(depending on the terminal type and the Ex components used)
Please observe the data of the terminal manufacturer,
e.g. tightening torque
Terminal boxes
Series 8150/1, Series 8150/2
Annex A
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
37