Mounting And Installation; Mounting / Dismounting, Operating Position; Operating Position; Mounting The Enclosure - Stahl 8150/1 Serie Mode D'emploi

6

Mounting and Installation

 Mount the device carefully and only in accordance with the safety notes
(see "Safety" chapter).
 Read through the following assembly instructions carefully and follow them precisely.
6.1

Mounting / Dismounting, Operating Position

6.1.1 Operating Position

DANGER! Risk of explosion if device installed in incorrect position!
Non-compliance may result in fatal or serious injuries.
 The device must be secured to the floor or a wall only – it is not designed to be
installed overhead or used as a free-standing unit.
 Install the device on a level surface only.
 Align the enclosure depending on the mounting type:
• For vertical installation: Any orientation.
• For horizontal installation: Cover on top.
• The device must not be suspended above the ground/the cover must not be at an angle.

6.1.2 Mounting the Enclosure

 Secure the device using the anchoring brackets. Secure the device using the anchoring
brackets.
All dimensions in mm [inches]
7 [0,28]
ø 7 [ø 0,28]
X
18 [0,71]
26 [1,02]
212727 / 815060300170
2021-02-25·IO00·III·en·02
14282E00
x
Mounting and Installation
≦ 90°
Variant
Standard
8150/.-....-....-...-4...
8150/-....-....-...-5...
8150/.-....-....-...-6...
8150/.-....-....-...-....-AR
8150/.-....-....-...-....-CC
20946E00
Terminal boxes
Series 8150/1, Series 8150/2
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
US
16523E00
US
US
US
US
Dimen-
sion X
10 [0.39]
20 [0.79]
15 [0.59]
25