Publicité
Step 13
Step
1
O2
D245
Pull the DRAWER FRONT BRACKETS (8G) apart and slide them
å
into the grooves in the DRAWER SIDES (D245 and D271). You
may need to gently tap them in with a hammer.
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
å
"LH" for easy identifi cation.
Fasten the DRAWER FRONT (O2) to the DRAWER FRONT
å
BRACKETS (8G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
3
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M64) to the DRAWER
å
FRONT (O2). Tighten one HIDDEN CAM.
Page 18
Push down
8G
D271
Groove
BLACK 9/16" LARGE HEAD SCREW
(24 used in this step)
1
2
M64
O2
VIEW THE T-SLOT BOX VIDEO
2
U n
D245
1S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D979 ) into the grooves
å
in the DRAWER SIDES (D245 and D271) and
DRAWER FRONT (O2).
4
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D245
Fasten the DRAWER BACK (D60) to the DRAWER
å
SIDES (D245 and D271) and DRAWER BRACE (M64).
Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
Repeat this step for the other drawers. Use the LARGE
å
DRAWER FRONT BRACKETS (9G) for the large drawers.
411830
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
D979
fi n
i s h
e d
s u
r f a
c e
D271
O2
30S
(30 used in this step)
D60
M64
D271
www.sauder.com/services
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Publicité
