Publicité
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (10F) into the large holes in the ENDS (A2 and B2).
Repeat this step for the UPRIGHT (C2) and BOTTOM (E).
10F
10F
Page 6
Do not tighten the TWIST-LOCK® FASTENERS in this step.
(12 used)
B2
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
A2
411830
10F
www.sauder.com/services
Publicité
