Hidden Cam - Sauder Lateral File 408924 Manuel D'instructions

Step 14
1
D87
Groove
Insert the DRAWER SIDES (D87 and D88) at an angle
å
into the slot at each end of the DRAWER BOX FRONT (K).
3
M63
Surface with

HIDDEN CAM

Fasten the DRAWER BRACE (M63) to the DRAWER
å
BOX FRONT (K). Tighten one HIDDEN CAM.
Page 18
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
K
D88
Maximum
Arrow
210 degrees
Minimum
190 degrees
K
VIEW THE T-LOCK BOX VIDEO
2
U n
fi n
s u
r f a
c e
D87
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D729) into the grooves
å
in the DRAWER SIDES (D87 and D88) and DRAWER
BOX FRONT (K).
4
D87
M63
Fasten the DRAWER BACK (D61) to the DRAWER
å
SIDES (D87 and D88) and DRAWER BRACE (M63). Use
five BLACK 1-9/16" FLAT HEAD SCREWS. (30S).
408924
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
i s h
e d
D729
K
D88
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
D61
Be sure the
D88
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
www.sauder.com/services