Product Presentation; General Description - ADEUNIS LoRaWAN MODBUS MASTER Guide Utilisateur

LoRaWAN MODBUS MASTER - Guide utilisateur / User guide version V2.0.0

1. PRODUCT PRESENTATION

Description:
• The adeunis® LoRaWAN MODBUS MASTER is a ready-to-use radio transmitter with a MODBUS interface
• This product meets the needs of users to communicate with one or several MODBUS slaves and transmit their information via a LoRaWAN
network.
The product use the Remote Terminal Unit (RTU) Modbus protocol to communicate with the slaves.
•
• The frame of the product can contain 24 registers (of 2 bytes) maximum per periodic frame. These registers can be distributed between the
monitored slaves (20 slaves maximum) knowing that for each slave 15 registers can be configured per frame.
• The product transmits the data from the slaves periodically through one or several frames (up to 6) with the same or different
periods of transmission.
The product transmits the data from slave either periodically or in an event-related way based on high or low thresholds.
•
The product is able to read or write in the registers of a slave through the network.
•
• The LoRaWAN MODBUS MASTER can be configured in Class A or Class C depending on user need.
• The configuration of the transmitter is accessible by the user via a micro-USB port or remotely via the LoRaWAN network, allowing in
particular a choice of modes of transmission, periodicity or triggering thresholds.
• The LoRaWAN MODBUS MASTER is powered by an external power supply (not included).
• The product is able to provide and control the power supply for a slave.
IMPORTANT NOTE: The LoRaWAN MODBUS MASTER is delivered by default with OTAA configuration, allowing the user to declare his/her
product to a LoRaWAN operator.
Composition of the package
The product is supplied in a cardboard box containing the following items:
top casing, electronic card, casing base plate,
Cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs

1.1. General description

Casing base
Antenna
2 holes for passing
collars through
4 fastening holes
Rail-DIN unlocking
lever
Casing base detail
Cables outlet
packing gland
Page
FR
EN
31 of 43