SilverCrest SLE 200 A1 Guide Abrégé page 9

WARNING: MATERIAL DAMAGE
The appliance is not suitable for drying lagging. If insu-
►
lation or lagging materials are damp following a pipe
burst, consult an expert.
Never expose the appliance to temperatures of 0°C
►
or lower. Residual water in the lines could freeze and
damage the system.
Do not use the appliance in a dusty or chlorinated
►
environment.
Basic safety instructions
To ensure safe operation of the appliance, follow the safety
guidelines set out below:
Check the appliance for visible external damage before
■
use. Do not use an appliance that has been damaged or
dropped.
To avoid potential risks, damaged mains cables should
■
be replaced by the manufacturer, their customer service
department or a similarly qualified person.
Do not operate the appliance outdoors.
■
During operation, always keep windows and doors closed
■
so that the appliance can work effectively.
Do not operate the appliance in the proximity of highly
■
inflammable gases or materials, near naked flames or in
areas prone to oil and water splashing.
■ 6 │ GB │ IE SLE 200 A1