Setting The Low Drag System - Gong SUPER POWER 2023 Guide De L'utilisateur

SETTING THE LOW DRAG SYSTEM (LDS)
❶ - Unfold the wing with the leading edge facing the wind on a clear non-abrasive or sharp surface, extrado
facing the ground and attached to a fixed point or secured with the pump leash. Attach your wrist leash to
the leash attachment of the wing, only with the velcro attachment of the leash.
❷ - Wing completely unfolded, deflated and secured,
take the 2 sets of the provided disassembled slats.
Each batten consists of a carbon tube, another
❹ - Insert the batten in the sheath with the plastic tip forward, while maintaining constant pressure, until the
aluminum tube is centered in the opening provided for this purpose. The batten must come into abutment
with the sheath.
EN
equipped with a plastic tip, an aluminum tube and
a screw fitting.
❸ - Fit the carbon tubes together.
- 31
GONG-GALAXY.COM