Stanley HY 227/10/5 Manuel Utilisateur page 16

Masquer les pouces Voir aussi pour HY 227/10/5:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
EN
Preserve this handbook for future reference
G
1. SAFETY PRECAUTIONS
B
All users must read and fully understand all information
contained in this owner's manual before assembling, operating,
or maintaining this air compressor.
Carefully review the following rules for safe operation and fully
understand all warnings.
An ACOUSTIC PRESSURE value of 4 m. corresponds to the
ACOUSTIC POWER value stated on the label located on the
compressor, minus 20 dB.
BEFORE USE
The compressor must be used in a suitable environment (well
ventilated with an ambient temperature of between +5°C and
+40°C) and never in places affected by dust, acids, vapours,
Always maintain a safety distance of at least 4 meters between the
Any coloring of the belt guards of the compressor during painting
Insert the plug of the electric cable in a socket of suitable shape,
Always use the I/O
Always disconnect power cord and air hose from the air compressor
When operating, the compressor must be placed on a stable,
GENERAL SAFETY INSTRUCTIONS
Never direct the jet of liquids sprayed by tools connected to the
Never pull the power cable to disconnect the plug from the socket
2. FEATURES (Pic. 1)
A. I/O Switch: The I/O switch is the activation mechanism that is
When tank pressure falls below the factory set "cut in" pressure,
B. Tank Pressure Gauge: The tank pressure gauge indicates the air
C. Regulated Pressure Gauge: The regulated pressure gauge
supervision or instruction concerning the use of the appliance by a
Children should be supervised to ensure that they do not play with
Check that you have unplugged the compressor and clean with a
The compressed air produced by the compressor cannot not be
particular treatments and cannot be used to fill the air bottles of
the pressure regulator and with the amount of air supplied by the
To avoid serious burns, never touch the cylinder head parts or
OPERATION
To avoid overheating of the electric motor, this compressor is
designed for intermittent operation
of one hour, then the compressor's capability is less than the air
requirements of the attachment or accessory with the air volume
When the compressor is plugged into an electrical source and
the I/O switch is in the "I" position, this compressor will cycle
automatically.
– Keep all body parts, hair, clothing, and jewelry away from moving
– Never operate the air compressor without all guards and shrouds
The compressor is fitted with a safety valve that is tripped in the
case of malfunctioning of the pressure switch in order to assure
When using compressed air, you must know and comply with
the safety precautions to be adopted for each type of application
the manufacturer of any attachment or accessory you use with this
indicates the amount of pressure that is allowed into the discharge
D. Regulator Knob: The regulator knob is used to adjust the air
I"
air pressure is increased by turning the knob clockwise and
E. Drain Valve: This valve allows to drain moisture from the tank,
F. Quick Coupler: The quick coupler is used to connect the airline
16

Publicité

Table des Matières
loading

Table des Matières