Introduction; Description Of Machine; Safety Systems - Felker FRS-30 Instructions D'utilisation

2.0 INTRODUCTION

2.1 D
ESCRIPTION OF MACHINE
Thank you for choosing one of our machines.
The manufacturer designs and produces duarble and
reliable machines to solve all cutting processes.
FELKER RAIL SAWS are available in a range of mod-
els to cut material upto 51" in . They can be placed in-
side factories or used directly on building yards.
These rail saws are designed to use diamond blades to
cut marble or granite pieces with dimension, size and
weight allowed by machines' structure.
Location and name of principal components (Fig.1)
1) Blade Guard
2) Guide Bars
3) Control Switch Box
4) Water Tank
5) Water Pump
6) Handwheel to adjust cutting depth - FRS-51
7) Table Legs
8) Tilting Bridge 0°- 45°
10
2
1
5
2.2 S
ECURITY WARNINGS ON THE MACHINE
The decals on the machine must always be kept clean
and in a readable condition.
The safety warning decals are fixed on the blade guard
as shown on page 7.
2.3 S
AFETY SYSTEMS
- Blade Guard: a protection device that avoids acci-
dental contacts with the blade.
It is obligatory to have this device securely mounted
before the machine is turned on.
- Overload protection: the overload protection stops
the motor in case of overload. Wait a few minutes
before turning the motor on again.
- Control Switch: easy access to the Start- Stop but-
tons. In case of interruption of electrical power, saw
will remains OFF until Start button is again engaged.
This prevents the saw from turning on accidentally
when electrical power is restored.
6
3
8
4
7
Fig. 1