Bürkle 5606-0600 Instructions D'emploi page 4

English
General safety requirements
` ` Read these directions for use carefully before using.
` ` Keep these directions for use where they will be
accessible for all users.
` ` Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
` ` The instrument must only be used by qualified
skilled employees.
` ` The instrument is designed for use in industry, labo-
ratories and science. The instrument is not suitable
for any application in private or public spaces.
Safety instructions before using
` ` Follow the manufacturer's instructions and safety
instructions of the medium you are filling.
` ` Damage to the respiratory tract and other organs
due to escaping or off-gassing media. Fill only in
ventilated rooms or under a suitable exhaust hood.
Wear appropriate protective clothing.
` ` The instrument is not suitable for filling off combus-
tible liquids.
` ` The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
` ` Do not use any force when operating the instru-
ment.
Safety instructions during and after use
CAUTION!
Escaping liquids due to falling over or tipping of
the instrument. Bodily injury due to escaping liquid
and damage to the instrument.
` ` Ensure sufficient stability of the instrument.
` ` Shut down and secure the instrument immedi-
ately.
` ` Contact the dealer or manufacturer.
` ` The instrument is suitable for indoor use and ma-
nual operation.
` ` Pump with manual operation. Not suitable for
continuous operation.
` ` Pay attention to have sufficient space above during
the filling process (minimum height: height of the
maximum extended piston + 20 cm).
` ` The instrument is not suitable for cleaning in a
dishwasher.
NOTE!
Pump and valves can be damaged or plugged by
dirt particles.
` ` Do not fill off any polluted media.
` ` Rinse the pump with a pH-neutral medium.
Layout and function
` ` The instrument is made of non-conductive material
(PTFE, FEP) and is suitable for filling acids and alka-
lis (pay attention to the chemical resistance).
` ` The instrument is suitable for filling from containers
with a capacity up to 1000 l into smaller containers.
` ` The instrument is maintenance-free and suitable at
a temperature range from 0 to 40 °C.
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
Assembly
1. Guide the barrel screw connection (accessory; not
WARNING!
Some liquid will continue to run. Bodily injury due
to escaping liquid.
` ` Close the shut-off valve on the discharge tube
before mounting.
included in delivery) and riser pipe  with the
discharge tube  into the container and screw it
together finger-tight.
2. If necessary adjust the riser pipe.
NOTE!
Ensure to use a fitting thread (see accessories).
` ` Screw the thread by hand and without any
force.
Safe filling
1. Place the filling container under the discharge tube.
2. Open the shut-off valve  on the discharge tube.
3. Activate the piston rod  by using the handle 
and fill off the liquid.
CAUTION!
Fluid ejection off the filling container. Bodily injury
due to escaping liquid.
` ` Wear the necessary protective clothing.