EGAmaster 58764 Manuel D'instructions page 43

Under trigger torque
display Torque
Note:
1. In Angle mode, the unit is degree.
2. Please put wrench still horizontally before do angle zero reset.
3. From 80.0% to 99.5%, LED turned on one by one to all on.
4. From 80.0% to 99.5%, buzzer beep intermittently to constantly.
ANGLE MODE OPERATION
Angle Mode
Appli Force Press
Appli Force
80% Target
Applied Force
and rotate to
target angle
*Note 3
Relax
*Note 1
Angle Zero Reset
successful
Torque Zero Reset
Press
*Note 2
Above trigger torque
display Angle
Buzzer Beep
intermittently
Constantly
*Note 4
Show Angle and
Torque interchangeably
43