Note:
1. From 80%~99.5% of target, LED turn on one by one to all LED on.
2. From 80%~99.5% of target, buzzer beep intermittently to constantly.
3. If measurement below tolerance, 5 Green LED stayed on, means NG.
4. If measurement above tolerance, 1 Red LED stayed on, means NG.
WIRELESS TRANSMISSION FLOW
Apply Torque
*Note 1
80% of Target
Apply force to
100% of Target
*Note 4
Show Torque and percentage interchangeably
Press
to cancel
Press
Transmit failed
START
*Note 2
Buzzer Beep
intermittently
Beep
Constantly
OK
*Note 3
to record and transmit
Record
Try Transmit, at
most 6 times
Transmit
successfully
41