EGAmaster 58764 Manuel D'instructions page 39

Note:
1. If appears, it means the wrench has been applied more than 110% of maximum
torque.
2. When 80% of the target torque is reached, the green LED will begin to flash and the alarm
tone will beep intermittently.
3. When 99.5% of the target torque has been reached, the buzzer will beep constantly and all
the LED will stay ON.
TRACK MODE OPERATION
START
(System initiate)
Set Target Torque
Apply Torque
Current Torque Value
Reached 80% of Target Torque
Current Torque Value
Buzzer
Buzzer
*Note 1
*Note 2
Green LED
Reached 80% of
Target Torque
*Note 3
Red LED
Approaching Target Torque
39