Bosch TCC78K750 Mode D'emploi page 39

Preparation using milk
For optimal milk froth, use cold
milk with a fat content of at least
1.5 % if possible.
1. Flip the cover of the milk frother (13) to
the left; the milk frother (12) is now ac-
cessible:
13
2. Deploy the appliance (see "Deployment
system").
3. Take the milk tube supplied with the
appliance (on delivery it is stowed in
the outer compartment on the right of
the appliance [15]) and connect it to the
attachment point on the milk frother (12).
Close the cover again.
4. Place container with milk next to the milk
frother. Introduce the milk tube into the
container. The notched end of the tube
should be fully immersed in the milk.
Bosch
12
12
15
5. Place a cup or glass under the coffee
outlet.
6. Select
White coffee
. The display shows the selected drink
along with the setting for coffee strength
and per-cup quantity for this drink:
(
7. Choose your settings for strength and
per-cup quantity.
o
8. Press
First milk is drawn in, prepared and
dispensed into the cup or glass.
Immediately after that the coffee is
brewed and then runs into the cup or
glass.
15
Latte Macchiato, Cappuccino
by turning the rotary knob
Cappuccino
n B
start/stop (10).
Dried milk residue is diffi cult to
remove, so clean the milk system
immediately after use (see
"Cleaning the milk system").
English | 7
or
)
}
TCC78K750 | 01/2009