Important - brennenstuhl PIR 110 Notice D'utilisation

011409 Bewegungsmelder PIR 110_180_011409 Bewegungsm
Installation- and Operating
Instructions
Infrared-Movement detector
PIR 110 and PIR 180
We are pleased that you decided to purchase
our movement detector.
Please read the operating instructions be-
fore you begin the installation and keep
them for future reference.
IMPORTANT: Please do not perform any
technical modifications on this product. This
product is not suited for use in combination
with dimmer switches. This motion sensor
must be installed by a qualified electrician in
compliance with the IEC's regulations for
wiring (reinforced wire 0.75 - 1.50 mm
The installation has to be in accordance to
national regulations and laws. In many coun-
tries there are additional requirements to
the national requirements. Before working
on electrical appliances, make sure that the
power is turned off (breaker/ main switch).
The motion sensor may only be used to
trigger lights.
10
2
).