Graco ASSURE Notice De L'utilisateur page 7

WARNING
NEVER LEAVE LUGGAGE or other objects unsecured in a vehicle,
they are liable to cause injuries in the event of a collision.
REPLACE THE BOOSTER SEAT AFTER AN ACCIDENT OF
ANY KIND. An accident can cause damage to the booster seat that you
cannot see.
DO NOT MODIFY YOUR BOOSTER SEAT or use any accessories
or parts supplied by other manufacturers.
NEVER USE BOOSTER SEAT IF IT HAS DAMAGED OR
MISSING PARTS. DO NOT use a cut, frayed or damaged vehicle seat
belt.
THE BOOSTER SEAT CAN BECOME VERY HOT IF LEFT IN
THE SUN. Contact with these parts can burn your child's skin. Always
touch the surface of any metal or plastic parts before putting your child
in the booster seat.
NEVER GIVE THIS BOOSTER SEAT to someone else without also
giving them this manual.
NEVER USE A SECOND-HAND BOOSTER SEAT or a booster
seat whose history you do not know.
NEVER USE THIS BOOSTER SEAT without the armrests attached
to the base.
Care and Maintenance
• CONTINuOuS uSE Of BOOSTER SEAT MAy CAuSE dAMAGE TO
vEhICLE SEAT. Use a towel or thin blanket to protect upholstery.
• METAL ANd PLASTIC PARTS: clean with mild soap and cool water. No
bleach or detergents.
• FROM TIME TO TIME CHECK YOUR BOOSTER SEAT for worn parts,
torn material and stitching. If damage is found, DO NOT try to modify the
booster seat. Replace the booster seat.
• DO NOT USE BOOSTER SEAT without its cover.
12
GB
GB
Assembling the booster seat
1
Flip head support and lower back support over as shown.
Squeeze red adjustment button and slide two pieces together until they
2
snap into place.
ChECK to make sure two pieces are securely snapped together by pulling
on them.
Attach elastic strap as shown.
3
Flip seat over and insert the fabric from the head support underneath the
4
fabric on the lower back support as shown.
To make insertion of fabric easier, slide the upper and lower back pieces
apart by squeezing the red adjustment button.
Attach backrest to base. "U"-shaped hooks on bottom of backrest will
5
interlock with bars on base.
Make sure that no part of the seat covering interferes when attaching
backrest to the base.
Once backrest is securely attached to the base, push backrest up as shown.
6
Your Graco booster seat is now ready to use. See "Using your Graco
7
Booster Seat" and "Securing Your Child in Vehicle".
13