K&N 57-0461 Instructions D'installation

Part Number 57-0461
Vauxhall Vectra MK1 L4 2.2L 16v 145Bhp 2000-2002
Opel Vectra B L4 2.2L 2000-2003
1. Unclip the CCSV (carbon canister solenoid valve) and electrical harness from the
air box lid. (Fig. 1&2)
2. Unclip and remove the original flexi intake hose from the air box lid. (Fig. 3)
3. Unclip and remove the air box lid from the vehicle. (Fig. 4)
4. Undo the two rubber bobbins and remove the air box base from the vehicle.
(Fig. 5)
5. Assemble the "L" bracket and saddle bracket using the tapered screw, conical
washer, flat washer and nylock nut supplied. (Fig. 6)
6. Remove the lifting eye screw and mount the "L" bracket assembly using the M8
Screw and washer supplied. (Fig. 7&8)
7. Fit the metal tube halfway into the original intake hose and firmly tighten the
original hose clamp. (Fig. 9)
8. Fit the rubber filter adaptor onto the metal tube as shown. (Fig. 10)
9. Fit the #64 hose clamp around the saddle bracket, fit the filter through the hose
clamp onto the rubber adaptor and firmly tighten the hose clip. (Fig. 11&12)
Carry out a final height / alignment checks of the kit fitment, Installation is now
10.
complete.
Fig. # 1
Fig. # 5
Fig. # 9
For technical support contact our European technical team: "eindhoven.tech@knfilters.com" We will try to answer your mail within 48 hours.
For other K&N products and / or more information about the K&N products please visit our website: www.knfilters.com
INSTALLATION INSTRUCTIONS
Fig. # 2
Fig. # 6
Fig. # 10
For UK technical enquiries contact R&D department at 01925-636950, Mon-Thu from 8:30 am to 5 pm.
Instruction Sheet No.A2054-496
Fig. # 3
Fig. # 7
Fig. # 11
(09.11.10)
Parts list:
1 x Air filter Element.
1 x Rubber Filter Adaptor.
1 x Literature pack.
Fixing Kit:-
1 x "L" Bracket.
4 x Plastic Ties.
1 x Metal Tube.
1 x M6 Washer.
1 x M6 Nylock Nut.
1 x Tapered Screw.
1 x Conical Washer.
1 x #64 Hose Clamp.
1 x Saddle Bracket.
1 x M8 Screw.
1 x M8 Washer.
WARNING: Before starting the engine carry out a final
fitment check of the K&N performance kit. It will be
necessary for all intake systems to be checked
periodically for realignment, clearance and tightening of
all connections. Failure to follow the above instructions
or proper maintenance may void the warranty.
FILTER MAINTENANCE: K&N suggests checking the
filter periodically for excessive dirt build-up. W hen the
element becomes covered in dirt (or once a year),
service it according to the instructions on the Recharger
service kit available from your K&N dealer, part number
99-5003EU.
For cleaning instructions please visit our website:
www.knfilters.com/cleaning
Fig. # 4
Fig. # 8
Fig. # 12