Technical Characteristics - Mestra R-080400 Mode D'emploi

English
♦ Open the cover carefully: steam pouring out
from the tank could cause burns.
♦ Always keep the unit's cover closed while
polymerisation programs are running.
♦ Never place more than 9 muffles on the
polymerising tray.
♦ Always keep at least 20 cm of water in the
bottom of the tank, as the heating elements
may be damaged if the level is lower.

TECHNICAL CHARACTERISTICS

Height x width x depth:
Tank dimensions:
Weight:
Power supply:
Consumption:
Nº muffles with flange:
12
R-080400
420 x 270 x 480 mm
335 x 180 x 350 mm
15 kg
230 V, 50/60 Hz
1750 W
9
♦ Always leave a gap of at least 15 cm between
the unit's ventilation grille and the nearest
wall or other object.
♦ Before plugging in the unit, fill the tank with
water to 10 cm below the cover.
♦ TALLERES MESTRAITUA, S.L. recommends
polymerising at around 95 ºC. At higher
temperatures too much steam may be
generated.
R-080402
510 x 420 x 500 mm
350 x 320 x 400 mm
20 kg
230 V, 50/60 Hz
3000 W
18